Service Manual

HYDROSTATIC DRIVE SYSTEM
6-3Floating Deck Mid-Size Service Manual
6
10. Remove the bolt, nut, 2 washers and spacer secur-
ing the brake clutch strap to the underside of the
chassis (Fig. 0940).
12. Remove the bottom bolt, nut and spacer securing
the right hand side plate to the frame (Fig. 0942).
Fig 0940 PICT-0295
Fig 0942 PICT-0562
13. Loosen the nut securing the hydro idler shoulder
bolt to the frame until there is enough clearance for
the hydro belt to pass over the top of the idler pulley
assembly (Fig. 0943).
11. Unhook the hydro idler pulley spring from the tab on
the chassis (Fig. 0941).
Fig 0943 PICT-0563
Fig 0941 PICT-0559