Service Manual

HYDROSTATIC DRIVE SYSTEM

6-4 Floating Deck Mid-Size Service Manual

Hydro Drive Transmission Traction Belt

Installation

14. Remove the hydro drive belt (Fig. 0944). 2. Tighten the nut and shoulder bolt securing the idler

bracket to the frame (Fig. 0946).

Fig 0944 PICT-0564

Fig 0946 PICT-0563

3. Install the bolt, spacer and nut securing the bottom

of the right side plate to the frame (Fig. 0947).

1. Route the hydro drive belt around the pulleys as

shown (Fig. 0945):

Note: The spring and clutch have been removed for

photo purposes.

Fig 0947 PICT-0562

Fig 0945 PICT-0348a