Service Manual

HYDROSTATIC DRIVE SYSTEM
6-6 Floating Deck Mid-Size Service Manual
6
8. Install the hydro idler spring to the spring post (Fig.
0952).
10. Install the PTO idler spring to the spring post on the
frame (Fig. 0954).
Fig 0952 PICT-0565
Fig 0954 PICT-0291a
11. Install the trailing shield into the frame by fi rst insert-
ing the right side of the trailing shield rod (bent at
a 90 degree angle) into the hole in the right side of
the frame and then insert the left end of the trailing
shield rod (bent at a 45 degree angle) into the hole
in the left side of the frame (Fig. 0955).
9. Route the PTO drive belt around the clutch (Fig.
0953).
Fig 0955 PICT-0273
Fig 0953 PICT-0364a