Service Manual

SPECIFICATIONS
2-18 Floating Deck Mid-Size Service Manual
International Gear with T-Bar Controls cont.
2
Mower Drive:
Mower Engagement: Engine mounted electric clutch
Clutch Adjustment:
Periodic air gap adjustment required - .018” + .003” (0.45 + 0.0762mm)
PTO Drive Belt: HB section with Aramid (Kevlar) cords and dry clutching envelope
PTO Idler: Spring loaded pivot hub with grease fi tting for lubrication / 91cm deck includes additional
fi xed idler
Deck Drive Belt: HA section with Aramid (Kevlar) cords and standard (non-clutching) envelope
Deck Drive Idler: Spring loaded / 91cm decks have non-greaseable pivot hub
Mower Decks:
HOC Range: 1” (2.5cm) to 4.50” (11cm) in 1/4” (0.6cm) increments
Blades: Two .250” (6.3mm) thick heat treated steel blades
Spindles: Machined steel 1.00” (2.5cm) diameter shaft
Spindle Housing: Ductile cast iron, 9-3/8” (24cm) diameter mounted with six bolts
Bearings: Sealed ball bearings permanently lubricated with high temperature grease
Construction: 7 gauge (.179” (4.5mm)) steel welded construction
Blade Tip Speed: (Domestic) 91cm - 12,070 ft/m calculated @ 2900 engine rpm
Anti-Scalp Rollers: 91cm - 2 front mounted
Skid Plate: Standard
Adjustable Discharge Baffl e: Standard
Rubber Discharge Chute: Standard
Rubber Discharge Chute: Standard
Unit Dimensions:
Model No. Height*
Width Defl ector
Down
Width Defl ector
Raised Length* Weight**
30031 (CE) 41.2” (105cm) 51.1” (130cm) 37.2” (94cm) 82.7” (210cm) 598 lbs. (271kg)
*With handle height in lowest position
**Estimated operating weight