Service Manual

HYDROSTATIC DRIVE SYSTEM
6-14 Floating Deck Mid-Size Service Manual
6
11. Unhook the lower end of the extension spring from
the control shaft (Fig. 0983).
13. Loosen the set screws located in the control shaft.
The lower set screw can be accessed through the
opening in the frame (Fig. 0985).
Fig 0983 PICT-0427a
Fig 0985 PICT-0430
14. Disconnect the pump from the control shaft and
remove the pump from the frame (Fig. 0986).
12. Remove the two mounting bolts and nuts securing
the hydraulic pump to the frame (Fig. 0984).
Fig 0986 PICT-0432
Fig 0984 PICT-0429