Service Manual

HYDROSTATIC DRIVE SYSTEM

6-16 Floating Deck Mid-Size Service Manual

3. Install the 2 set screws into the control shaft (Fig.

0990).

5. Install 2 bolts and nuts securing the pump to the

frame (Fig. 0992).

Fig 0990 PICT-0430

Fig 0992 PICT-0429

6. Install the 2 high pressure hoses to the ﬁ ttings on the

pump (Fig. 0993).

Note: Ensure that the marked hose is connected to

the marked port on the pump.

4. Hook the hydro pump spring to the bolt on the

control shaft (Fig. 991).

Fig 0993 PICT-0425

Fig 991 PICT-0427a