Service Manual

HYDROSTATIC DRIVE SYSTEM
6-22 Floating Deck Mid-Size Service Manual
6
1. Transfer the fi ttings and all markings to the replace-
ment wheel motor. Torque the fi ttings to 85-95 ft-lbs.
(115-129 Nm) (Fig. 1015).
Fig 1015 PICT-0456
Wheel Motor Installation
16. Cap the hoses and wheel motor fi ttings so that
debris does not enter the system. Position the hose
ends out of the way of the wheel motor.
17. Remove the 4 bolts securing the wheel motor to the
motor mount (Fig. 1012).
19. Remove the 2 fi ttings from the wheel motor (Fig.
1014).
Fig 1012 PICT-0454
Fig 1014 PICT-0456
18. Remove the wheel motor (Fig. 1013).
Fig 1013 PICT-0455