Service Manual

HYDROSTATIC DRIVE SYSTEM
6-23Floating Deck Mid-Size Service Manual
6
3. Install 4 bolts to secure the wheel motor to the motor
mount (Fig. 1017).
Fig 1017 PICT-0454
4. Uncap the hoses and fi ttings and connect both
hydraulic hoses to the wheel motor, following mark-
ings made previously. Torque the hose fi ttings to
34-38 ft-lbs. (46-52 Nm) (Fig. 1018).
2. Position the wheel motor into the frame (Fig. 1016).
Fig 1018 PICT-0453
Fig 1016 PICT-0455
5. Install the woodruff key into the wheel motor shaft
keyway (Fig. 1019).
Fig 1019 PICT-0449