Service Manual

HYDROSTATIC DRIVE SYSTEM
6-25Floating Deck Mid-Size Service Manual
6
13. Tighten and torque the hub nut to 200 + 25 ft-lbs.
(271 + 34 Nm) (Fig. 1025).
15. Purge the hydraulic system. See “Bleeding the
Hydraulic System” on page 6-32.
Fig 1025 PICT-0462a
14. Fill the hydraulic reservoir tank with hydraulic fl uid
(15w-50 synthetic engine oil) as specifi ed. Note that
there are fi ll level lines inside of the reservoir (Fig.
1026).
10. Lower the machine so the rear tires are resting on
the ground.
11. Apply the parking brake.
12. Tighten and torque the 4 lug nuts to 85 + 8 ft-lbs.
(115 + 11 Nm) (Fig. 1024).
Fig 1026 PICT-0382
Fig 1024 PICT-0463a