Service Manual

HYDROSTATIC DRIVE SYSTEM
6-28 Floating Deck Mid-Size Service Manual
6
6. Replace reservoir cap.
7. Bleed the hydraulic system. See “Bleeding the Hyd-
raulic System” on page 6-32.
2. Tighten the locking nuts while maintaining the orient-
ation of the fi ttings (Fig. 1035).
4. Install the two hydraulic hoses onto the reservoir
fi ttings (Fig. 1037).
Fig 1035 PICT-0396a
Fig 1037 PICT-0436a
5. Fill the reservoir with hydraulic fl uid (15w-50 syn-
thetic engine oil) as specifi ed. Note that there are fi ll
level lines inside of the reservoir (Fig. 1038).
3. Position the reservoir assembly onto the mounting
fl ange. Install 2 bolts and nuts securing the reservoir
(Fig. 1036).
Fig 1038 PICT-0382
Fig 1036 PICT-0400