Service Manual

GEAR DRIVE

7-7Floating Deck Mid-Size Service Manual

Transmission Driven Pulley Removal

4. Insert the shoulder bolt into the idler arm pivot and

position the idler assembly into the frame (Fig.

1071).

Fig 1071 PICT-1499

Transmission Driven Pulley

Replacement

5. Install a nut onto the shoulder bolt securing the idler

assembly to the frame (Fig. 1072).

1. Turn the engine off and remove the key from the

ignition.

2. Raise the machine to access the underside of the

frame.

Fig 1072 PICT-1497

6. Hook the drive belt idler spring to the tab on the

frame (Fig. 1073).

Fig 1073 PICT-1496

Note: The trailing shield has been removed for

photo purposes.