Service Manual

GEAR DRIVE

7-11Floating Deck Mid-Size Service Manual

5. Slide the driven pulley onto the transmission drive

shaft (Fig. 1087).

Fig 1087 PICT-1571

6. Tighten the set screw securing the transmission

driven pulley to the transmission driveshaft (Fig.

1088).

4. Begin threading the set screw into the driven pulley

hub (Fig. 1086).

Fig 1088 PICT-1511

Fig 1086 PICT-1518

7. Install a retaining ring onto the end of the transmis-

sion drive shaft (Fig. 1089).

Fig 1089 PICT-1510