Service Manual

GEAR DRIVE

7-20 Floating Deck Mid-Size Service Manual

7. Install 2 bolts and nuts to secure the ﬂ ange bearing

to the frame (Fig. 1122).

Fig 1122 PICT-1536

8. Install 4 transmission mounting bolts and lock

washers securing the transmission to the frame (Fig.

1123).

6. Slide the transmission splined shaft into the RH

coupler assembly. Position the transmission so that

the output shaft drops through the opening in the

frame (Fig. 1121).

Fig 1123 PICT-1534

Fig 1121 PICT-1549

9. Slide the coupler and coupler guard onto the trans-

mission splined shaft (Fig. 1124).

Note: Align the 2 grease ﬁ ttings.

Fig 1124 PICT-1553a