Service Manual

GEAR DRIVE

7-21Floating Deck Mid-Size Service Manual

Note: Relubricate the shafts, if needed (Fig. 1127).

11. Install 2 bolts and nuts securing the transmission

axle ﬂ ange bearing to the frame (Fig. 1126).

Fig 1126 PICT-1525

Fig 1127 PICT-1553a

12. Route the wheel drive belt around the transmission

pulley (Fig. 1128).

10. Slide the transmission pulley/output shaft assembly

through the frame and into the coupler assembly

(Fig. 1125).

Fig 1128 PICT-1524

Fig 1125 PICT-1554