Service Manual

MOWER DECKS
8-14 Floating Deck Mid-Size Service Manual
8
12. Clean and inspect the housing, bearings and spacer
for wear and damage. Replace as necessary.
Spindle Assembly (Fig. 1195)
Fig 1195 PICT-1204a
A. Spindle Shaft E. Bearing Shield
B. Bearing (2) F. Pulley
C. Bearing Spacer G. Washer
D. Spindle Housing H. Nut
11. Remove the 2 bearings and the spacer from the
spindle housing (Fig. 1194).
Fig 1194 PICT-1203
A
B
B
F
H
D
C
E
G
Spindle Rebuild and Installation
1. Install a bearing into one side of the spindle housing
(Fig. 1196).
Fig 1196 PICT-1208
2. Insert the spacer into the spindle housing (Fig.
1197).
Fig 1197 PICT-1210