Service Manual

MOWER DECKS
8-46 Floating Deck Mid-Size Service Manual
8
3. Adjust distance from the top of HOC stop to the
center of the ball joint to 4.21” ± .06” (10.7 + .15cm).
Secure the jam nut against HOC pin. The hairpin
holes in HOC pin are to be approximately inline with
ball joint through hole (Fig. 1315).
Fig 1315 PICT-1278a
4. Insert the ball joint mounting bolt into the mower
deck bracket (Fig. 1316).
A. 4.21” + . 6” (10.7 + .15cm)
Fig 1316 PICT-1270
A
5. Slide a spacer onto the bolt (Fig. 1317).
Fig 1317 PICT-1269
6. Slide the ball joint/pin assembly onto the bolt and up
through the mower deck bracket (Fig. 1318).
Fig 1318 PICT-1267