Service Manual

CHASSIS
3-10 Floating Deck Mid-Size Service Manual
3
6. Remove the bolt, nut, washers and idler tube secur-
ing the PTO idler arm assembly to the frame (Fig.
0036).
8. Press out the bearing sleeves from the idler arm
(Fig. 0038).
Fig 0036 IMG-7690
Fig 0038 PICT-0605
7. Remove the PTO idler arm assembly from the frame
(Fig. 0037).
Fig 0037 PICT-0604a
4. Raise the machine so that the underside of the
chassis can be accessed.
5. Remove the PTO idler arm spring from the spring
post and the idler arm (Fig. 0035).
Fig 0035 PICT-0291a