Service Manual

ELECTRICAL

9-15Floating Deck Mid-Size Service Manual

Operator Presence Control (OPC)

Switch Replacement (T-Bar)

1. Turn the engine off and remove the key from the

ignition.

2. Lift the locking tab on the front of the operator

presence control switch and unplug the harness

connector from the switch (Fig. 1425).

3. Remove the cotter pin from the upper end of the

control rod (Fig. 1426).

Fig 1425 PICT-1744

Fig 1426 PICT-1679a

4. Remove the control rod from the control bar/bail

assembly (Fig. 1427).

Fig 1427 PICT-1682

OPC Switch Removal (T-Bar)