Service Manual

ELECTRICAL

9-16 Floating Deck Mid-Size Service Manual

OPC Switch Installation (T-Bar)

5. Repeat steps 3 and 4 to remove the opposite control

rod from the control bar/bail assembly.

6. Remove the bail from the T-Bar handle by sliding it

off the OPC Switch mounting bracket and remove it

from the machine (Fig. 1428).

1. Install the OPC switch into the switch mounting

bracket on the T-Bar (Fig. 1430).

Fig 1428 PICT-1785a

Fig 1430 PICT-1786

2. Position the bail onto the OPC handle by sliding

the switch bracket up around the switch mounting

bracket (Fig. 1431).

7. Remove the OPC switch from the switch mounting

bracket (Fig. 1429).

Fig 1431 PICT-1785a

Fig 1429 PICT-1786