Service Manual

ELECTRICAL

9-17Floating Deck Mid-Size Service Manual

3. Insert a control rod through the T-Bar handle/bail

assembly mounting pivots (Fig. 1432).

5. Repeat steps 3 and 4 to install the opposite control

rod.

6. Plug the harness connector into the OPC switch

(Fig. 1434).

Fig 1432 PICT-1682

Fig 1434 PICT-1744

4. Install a cotter pin into the upper end of the control

rod (Fig. 1433).

Fig 1433 PICT-1679a