Service Manual

ELECTRICAL

9-22 Floating Deck Mid-Size Service Manual

3. Install a nut securing the ignition switch to the control

panel (Fig. 1451).

5. Position the bottom panel to the control panel and

install 2 screws securing the back side of the bottom

panel to the control panel (Fig. 1453).

Fig 1451 PICT-1800

Fig 1453 PICT-1719a

6. Position the manual tube to the control panel. Install

2 screws securing the manual tube R-clamps and

bottom panel to the control panel (Fig. 1454).

4. Plug the wire harness into the ignition switch (Fig.

1452).

Fig 1454 PICT-1718

Fig 1452 PICT-1798