Service Manual

ELECTRICAL

9-24 Floating Deck Mid-Size Service Manual

Delay Module Installation (T-Bar)

5. Unplug the harness connector from the delay

module (Fig. 1458).

7. Remove the bolt and nut securing the delay module

to the bottom panel (Fig. 1460).

Fig 1458 PICT-1805

Fig 1460 PICT-1809

1. Position the delay module on the inside of the bot-

tom panel. Install a bolt and nut securing the delay

module to the bottom panel (Fig. 1461).

6. Remove the fuse block from the bottom panel and

remove the bottom panel from the machine (Fig.

1459).

Fig 1461 PICT-1809

Fig 1459 PICT-1806