Service Manual

ELECTRICAL
9-56 Floating Deck Mid-Size Service Manual
9
Proximity Neutral Switch
Replacement (T-2)
Kill Relay Installation (T-2)
Proximity Neutral Switch Removal (T-2)
1. Plug the kill relay into the wire harness (Fig. 1576).
1. Turn the engine off and remove the key from the
ignition.
2. Disconnect the negative battery cable from the
battery.
3. Unplug the harness from the proximity neutral switch
connector (Fig. 1577).
Fig 1576 PICT-1937
Fig 1577 PICT-1938
4. Remove the cable tie securing the switch wires to
the frame (Fig. 1578).
2. Connect the negative battery cable to the battery.
Fig 1578 PICT-1939