Service Manual

CHASSIS
3-27Floating Deck Mid-Size Service Manual
3
13. Install the key into the transmission driveshaft key-
way (Fig. 0099).
15. Apply thread locking compound to the drive pulley
set screw (Fig. 0101).
Fig 0099 PICT-1583 Fig 0101 PICT-1587a
16. Install the set screw into the drive pulley (Fig. 0102).14. Position the drive pulley onto the transmission drive
shaft so that the pulley hub faces toward the ma-
chine. The transmission driveshaft should be fl ush
with the outside fl ange of the pulley (Fig. 0100).
Fig 0102 PICT-1580
Fig 0100 PICT-1582