Service Manual

CHASSIS
3-53Floating Deck Mid-Size Service Manual
3
The following procedures are the same for both the left
and right castor assemblies.
1. Remove the locking pin from the castor fork assem-
bly (Fig. 0202).
Fig 0202 PICT-1316
Castor Wheel Replacement
Castor Wheel Removal
9. Tighten the carrier frame mounting bolts on both
sides of the machine. Torque to 70 + 10 ft-lbs. (94.9
+ 13.6 Nm) (Fig. 0200).
Fig 0200 PICT-1303
10. Remove the straight edge and 2x2 piece of stock.
11. Install the carrier frame cover (Fig. 0201).
8. Align the carrier frame and engine deck to meet the
11/16” + 1/4” (17.46mm + 6.35mm) measurement at
the front carrier frame cross brace (Fig. 0199).
Fig 0201 PICT-1038 Fig 0199 PICT-1345