Service Manual
CHASSIS
3-66 Floating Deck Mid-Size Service Manual
3
17. Remove the bulkhead fuel fi tting from the tank
through the fuel cap opening (Fig. 0249).
Note: A fl exible magnet tool is used to aid in re-
moval.
19. Using a needle nose vise grip, clamp the threaded
stud up near where the stud threads into the tank
and remove the stud from the recessed fuel tank nut.
Repeat for second threaded stud (Fig. 0251).
Fig 0249 PICT-5356
Fig 0251 PICT-0535a
18. Inspect the fi lter screen on the bulkhead fuel fi tting.
Clean or replace the fi lter screen if it is clogged or
damaged (Fig. 0250).
Note: If fuel is leaking from the bulkhead fuel fi tting
area of the tank, the seal on the fi tting has
been compromised and the whole fi tting must
be replaced.
Fig 0250 PICT-5360b
16. Remove the fuel cap assembly from the fuel tank
(Fig. 0248).
Fig 0248 PICT-5355