Service Bulletin

Debris Removal
Seats are delivered with a plastic cover for shipping protection. Sometimes a
seat may not have this plastic completely removed before use, leaving excess
plastic in and around the seat and switch (as shown in the picture below). This
excess plastic can dislodge and get caught in the switch and cause it to become
inoperative. Debris such as rags, trash, or gloves should not be left around the
seat for similar reasons.
It may be easer to remove the shipping plastic from under the seat by lifting out
the bottom seat cushion. Remove the seat pad by using the seat pad clips
located at the front of the seat, (clip areas are shown on the seat assembly
diagram). If for some reason the seat pad cannot be removed, use a tool such
as long pliers to remove all loose plastic left on the seat.
Pad clips
Excess plastic