Operator's Manual

Engine Oil Pressure Warning Light (Fig. 9)—Indicates
dangerously low engine oil pressure.
Glow Plug Indicator Light (Fig. 9)- When lit, indicates the
glow plugs are on.
Water in The fuel Light (Fig. 9)—Indicates water in fuel
system.
Temperature Gauge (Fig. 9)—The temperature gauge reg-
isters the temperature of the coolant in the cooling system.
Temperature Reset Button (Fig. 9)—Press the reset button
to start the engine after high-temperature shut down.
Hour Meter (Fig. 9)—Shows total hours that the machine
has been operated.
Fuel Gauge (Fig. 9)—Indicates the level of fuel in the tank.
Throttle Control (Fig. 9)—Move the control forward to
increase engine speed, rearward to decrease speed.
Hi-Lo Speed Control (Fig. 9)—Allows the speed range to
increase for transport of the machine.
Cruise Control (Optional) (Fig. 9)—Controls speed of the
machine.
15
Figure 9
1. Lift lever
2. PTO switch
3. Ignition switch
4. Charge indictor
5. Low water level light
6. Engine coolant temperature warning light
7. Engine oil pressure warning light
8. Glow plug indicator light
9. Water-in-fuel light
10. Temperature gauge
11. Temperature reset button
12. Hour meter
13. Fuel gauge
14. Throttle control
15. Hi-Lo speed control
16. Cruise control (optional)
1
5
2
7
8
910
11
16
15
14
13
12
6
3
4