Installation Instructions

FormNo.3397-305RevA

Guardian

FineRecycler

CompletionKit

Base72inMowerforGroundsmaster

3320,3280-D,and7200

ModelNo.30346

InstallationInstructions

Beforeinstallingthiskit,refertoyourtractionunitOperator’s

Manualforsafetyinstructionsandtheproductoverview.

1.Blockupthedecksoitdoesnotaccidentallyfall.

2.Removethebeltcoversfromthetopofthedeck.

3.Positiontheright,center,andleftrecyclerchambers

underthedeck,aligningthemountingholesasshown

inFigure1.

Figure1

1.Rightchamber

3.Leftchamber

5.Roller

2.Centerchamber

4.Rollerbracket6.Rollerspacer

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3397-305*A

PAGE 1
Form No. 3397-305 Rev A Guardian® Fine Recycler® Completion Kit Base 72in Mower for Groundsmaster® 3320, 3280-D, and 7200 Model No. 30346 Installation Instructions Before installing this kit, refer to your traction unit Operator’s Manual for safety instructions and the product overview. 3. Position the right, center, and left recycler chambers under the deck, aligning the mounting holes as shown in Figure 1. 1. Block up the deck so it does not accidentally fall. 2.
PAGE 2
Note: Use the chart below to determine how many chamber mounting holes you must use for each deck application. Traction Units Number of holes used left chamber Number of holes used center chamber Number of holes used right chamber Groundsmaster 3280/3320 4 6 5 Groundsmaster 7200/7210 6 6 6 4. Secure the chambers to the deck with carriage bolts (5/16 x 3/4 inch) and nuts (5/16 inch). Note: Position the nuts to the outside of the deck (Figure 1). 5.