Operator's Manual

17.Mountaspringclip(Figure13)intoeachofthenew
holesinthecenterdeckcoverwitha#8x1/2inchpan
headscrewanda#8nut.
Figure13
1.Springclip
18.Installthecenterdeckcovertothecuttingunit.
19.UsingthedimensionsshowninFigure14,locate,mark
anddrilla2.2cm(0.875inch)diameterholeinthe
frontoftherightcastorbracket.
Figure14
1.2.2cm(0.875inch)
diameter
3.0.94inch(2.4cm)
2.5.1cm(2.00inch)
20.Mountthetie-downbrackettotherightrearcornerof
thecuttingunitwith3carriagebolts(5/16x1inch)
and5/16locknuts.Positionthebracketasshownin
Figure15.Theboltheadsaretobepositionedinside
thecuttingunit.
Figure15
1.Tie-downbracket2.Beltcovermounting
bracket
21.Securethebeltcovermountingbrackettotheinsideof
thefrontgrassdeectorpivotbracketwith2capscrews
(5/16x1inch)and5/16locknuts.Positionthe
bracketasshowninFigure15.Theboltheadsareto
bepositionedinsidethecuttingunit.
22.PositionthesmallerV-beltaroundthesmallersheave
ofthenewspindlepulley(Figure16).
23.Re-installthecastorarmtothecuttingunitwiththe
fastenerspreviouslyremoved.
24.Slidetheblowerassemblyontothecuttingunitwhile
insertingtheadjustableclamprodsintotheholeinthe
frontofthecastorbracketandinthetie-downbracket.
Securetheadjustableclamps(Figure16).
Figure16
1.Blowerassembly2.Adjustableclamp
11