Operator's Manual

Figure23
1.Flangenut
4.Spacer
2.Bushing5.Bolt
3.Anti-scalproller
4.Selectaholesotheanti-scalprollerispositioned
tothenearestcorrespondingheight-of-cutdesired
(Figure24).
Figure24
1.1-1/2inches(38mm)3.2-1/2inches(63mm)
2.2inches(51mm)4.3inches(76mm)and
higher
5.Installtheangenutbushing,spacer,andbolt.
Torqueto40-45ft-lb(54-61N⋅m)(Figure23).
AdjustingtheRollers
Mounttherollersinthelowerpositionwhenoperating
inheightofcutshigherthan2-1/2inches(64mm)and
inthehigherpositionwhenoperatinginheightofcuts
lowerthan2-1/2inches(64mm).
1.DisengagethePTO,movethemotioncontrol
leverstotheneutrallockedpositionandsetthe
parkingbrake.
2.MovethethrottlelevertotheSlowposition,stop
theengine,removethekey,andwaitforallmoving
partstostopbeforeleavingtheoperatingposition.
3.Raisethefrontofthemachineandsupportiton
jackstands.
4.Removethefastenerssecuringeachrolleronyour
mowerdeckandmovetherollersupordownas
desired;refertoFigure25throughFigure29as
applicableforyourmower.
Figure25
AllMowerDecks
1.Frontroller
2.Rollershaft
Figure26
GuardianMowerDecksOnly
1.Bolt4.Nut
2.Rearunder-deckroller5.Bracket
3.Spacer
29