Operator's Manual

Specifications

Width of cut 62 in. or 72 in. width of cut, 3 blades.

Height of cut

1–5 in. (25–177 mm) adjustable in 1/2 in. (13 mm) increments. Height of cut adjust-

ment is achieved by changing spacers on castor wheels and length of height of cut rod.

Construction Housing is made of 7 gauge steel and reinforced with channels and plates.

Cutter drive

Isolation mounted gear box on cutting unit is driven by a PTO shaft. Power is

transmitted to the blades by one belt. Spindle shafts are supported by 2

greaseable, tapered roller bearings.

Blades Three 1/4 in. thick, heat-treated steel

Suspension and castor

wheels

Cutting unit has two front castors, consisting of 8 in. x 3.5 in. pneumatic wheel and

tire assembly with sealed ball bearings. Rear of cutting unit is suspended from lift

arms with adjustment links for cutting unit rake.

Anti-scalp features

Anti-scalp cup located on each blade. Anti-scalp rollers. Adjustable skid on each

end of cutting unit.

Cutting unit covers Steel covers

Note: Specifications subject to change without notice.