Operator's Manual

Figure20
1.57cm(22–1/2inch)hose3.Cabletie
2.132cm(52inch)Hose
16.Disconnectthewireandremovethethermo-switch
fromtheleftsideoftheenginethermostathousing
(Figure21).Discardtheswitch.
Figure21
1.Thermo-switch
17.Installthehoseadapterttingintotheengine
thermostathousing(Figure22).
Note:Applypipesealanttothemalepipethreadofall
switchesandadapterspriortoinstallation.
Figure22
1.Enginethermostathousing
3.57cm(22–1/2inch)long
hose
2.Hoseadaptertting
4.Hoseclamp
18.Connectthe57cm(22–1/2inch)lengthofhoseto
theenginethermostathousingadaptertting(Figure
22).Securethehosetotheadapterttingwithahose
clamp.Routethehoseundertheaircleanerasshown
inFigure22.Installahoseclampontothehoseand
connectthehosetothequickcouplerFigure22).This
isthepressurehose.
Note:Routethehosesawayfromanyhot,rotatingor
sharpobjects.Securethetwocouplerhosestogether
withacabletieasshownin
Figure22.
19.Disconnectthewireandremovetheswitchfromthe
rightsideoftheenginethermostathousing(
Figure23).
Figure23
1.Enginethermostathousing
2.Switch
20.Installthenewdualcontactswitchtotherightsideof
theenginethermostathousing(Figure24).
13