Operator's Manual

30.Loosenthepressurehosettingatthepumpand
rotatethetting45degreestowardtherearofthe
machine(Figure86).
Note:Figure86isshownasviewedfromunder
thetractionunit.
Figure86
1.Pump
2.Pressurehosedtting
(rotated45degrees)
31.Rollthesummerdeckandframeintoposition
andinstalltheve3/4"bolts,washersandnuts
thatconnectthedeckframetotherearframe
(
Figure87).Removetheliftcylinderpinsandrear
drivetires(ifrequired)togainaccesstotheboltson
therighthandside.Torquetheboltsto265foot
pounds.
Figure87
1.3mountingbolts(3/4inch),washersandnuts(Leftside)
32.Removetheclevispinsanda5/16"self-tapping
screwpinretainerssecuringtheverticaltube
supportassembliestotherearofthedeckframe
(Figure88).
Figure88
1.Deckframe3.Clevispin&screwpin
retainer
2.Verticaltubesupport
33.Pivotopentheoorplate(Figure89).
Figure89
1.Floorplate
34.Slidethedriveshaftontothegearboxshaft
(Figure90).Installtherollpinandtorquethebolts
to175-225inchpounds.
Figure90
1.Driveshaft
3.Bolt
2.Gearbox
4.Rollpin
35.Routeandconnectthehydraulicpressureandtank
hosestothevalve(Figure91).
33