Installation Instructions

Printed in the USA

W 2006 by The Toro Company

8111 Lyndale Avenue South

Bloomington, MN 55420-1196

Jack Stand Kit

Groundsmaster

)

7200/7210 Traction Units

Model No. 30375

Form No. 3356–241 Rev A

Installation Instructions

107-3969

1. Warning—read the Operator’s Manual.

2. Crushing hazard, mower—engage the parking brake, stop the

engine, and remove the ignition key before working under the

mower. Always use jack stands with the jack.

1. Align the holes in the jack mount with the holes in the

front of the carrier frame (Fig. 1)

2. Secure the jack mount to the front and underside of the

carrier frame with with (5) carriage screws and nuts

(Fig. 1).

Figure 1

1. Jack mount

3. Insert the jack tube onto the jack mount tube, align the

mounting holes and secure with the jack pin (Fig. 2).

Figure 2

1. Jack

2. Jack tube

3. Jack mount tube

4. Jack pin

4. To store jack:

A. Align the holes in the jack tube with the hole in the

jack mount tab (Fig. 3). Secure jack to the tab with

the jack pin.

Figure 3

1. Jack mount tab

2. Bungee cord

3. Jack tube & jack mount

tab

B. Hook bungee cord jack into hole in jack mount tab

to secure jack (Fig. 3). Fold down jack handle into

storage position.