Installation Instructions

12
MOUNTING INSTRUCTIONS
1. Position the machine on a level surface. Set the parking
brake, lower the cutting units, turn the ignition off and remove
the key.
2. Remove roll bar from mower. Save fasteners for later
reinstallation.
3. Remove the escape window, door, and lower right window
from the cab. Save fasteners for later reinstallation.
4. Connect the fusible link harness between the battery and the
positive harness on the cab wire harness.
5. Now is the time to connect the electrical harness to the
machine. Connect the cab wire harness with fusible link to
the battery positive and negative. Connect the spade
terminal to the fuse block, from the Auxiliary Power
accessory kit, model 30382. Install the 10 amp fuse.
Jodale • Perry