Installation Instructions
15
MOUNTING INSTRUCTIONS
11. Refasten front bracket loosely against front platform using
only front four holes. Leave the sides unattached for now.
Jodale • Perry
12. Take seat stop bracket and install in seat track at rear of
travel, with the fastener in the track.
13. Install weather stripping on cab, using O-rubber provided.
See Bulb Seal Schematic on the following pages.
14. Remove left door and escape window from cab. Attach cab
lift brackets to holes in upper A-C cross-member and lift cab
off shipping pallet, using an overhead crane. Slide seat to
the forward-most position
15. Install all four rubber isolators onto mounting brackets. See
Bolt Hole Alignment Schematic for order of fasteners.