Service Bulletin

Customer Service Bulletin
Commercial Business Group
Groundsmaster
®
455-D
Model/Serial Range: Model Number: Serial Numbers:
30401 20001-49999
Subject: Prevention of spinning Castor Forks.
Cap Assembly (92-9727) is available through your local Toro distributor and can be installed
onto the Castor Fork. When the Cap is tightened in place, it compresses the spacers to
resist the spinning action of the Castor Fork. Installation instructions are located below.
NOTE: When changing height-of-cut, ensure that all spacer washers and Height-of-Cut
Spacers are installed on the Castor Forks Operating without a complete set of
spacers/washers will prevent the Cap Assembly from controlling the Castor Fork.
Ref: 14-05 Copyright

, 1995. The Toro Company