Operator's Manual

ProductOverview
Specications
Note:Specicationsanddesignaresubjectto
changewithoutnotice.
Width
ofCut
1.575m(62inches)or1.829m(72inches)
Height
ofCut
Adjustablefrom25to127mm(1to5inches)in13
mm(1/2inch)increments
Net
Weight
Model30403–190kg(420lbs.)
Model30404–231kg(510lbs.)
Attachments/Accessories
AselectionofT oroapprovedattachmentsand
accessoriesisavailableforusewiththemachine
toenhanceandexpanditscapabilities.Contact
yourAuthorizedServiceDealerorauthorizedT oro
distributororgotowww.Toro.comforalistofall
approvedattachmentsandaccessories.
Toensureoptimumperformanceandcontinuedsafety
certicationofthemachine,useonlygenuineToro
replacementpartsandaccessories.Replacement
partsandaccessoriesmadebyothermanufacturers
couldbedangerous,andsuchusecouldvoidthe
productwarranty.
Operation
Note:Determinetheleftandrightsidesofthe
machinefromthenormaloperatingposition.
CAUTION
Ifyouleavethekeyintheignitionswitch,
someonecouldaccidentlystarttheengine
andseriouslyinjureyouorotherbystanders.
Removethekeyfromtheignitionbeforeyou
doanymaintenance.
CheckingtheLubricantin
theGearbox
ThegearboxindesignedtooperateonSAE80–90
weightgearlube.Althoughthegearboxisshipped
withlubricantfromthefactory,checkthelevelbefore
operatingthecuttingunit.
1.Positionthemachineandcuttingunitonalevel
surface.
2.Removethedipstick/llplugfromthetopof
thegearbox(Figure7)andmakesurethatthe
lubricantisbetweenthemarksonthedipstick.If
thelubricantlevelislow,addenoughlubricant
untilthelevelisbetweenthemarks.
g010548
Figure7
1.Dipstick/llplug
11