Installation Instructions

16.MountthealternatortothetopoftheA/Cmounting
bracketwithabolt(M10x110),spacer,lockwasher,
andM10locknut(Figure6).
Figure6
1.M10x110bolt(2)4.Lockwasher(2)
2.Alternator
5.Locknut(2)
3.Spacer(2)
17.LooselymounttheA/Cmountingbrackettothe
enginewithabolt(M10x110),spacer,lockwasher
(0.313inch),andM10nut.Positionthecomponents
asshownin
Figure6.
18.Usingtheuppermountinghole,looselyinstallthe
newalternatortensioningbrackettotheengine
withtheuppertensioningbracketmountingbolt
previouslyremoved(Figure7).Applythread
sealanttotheboltbeforeinstalling.
Figure7
1.M8x100bolt4.Tensioningbracket
mountingbolt(upper)
2.Lockwasher5.Tensioningbracket
adjustingbolt
3.Flatwasher6.Tensioningbracket
19.Looselymountthetensioningbracketandtheupper
corneroftheairconditionermountingbracketto
theenginewithabolt(M8x100),alockwasher
(0.313inch),andaM8atwasher(
Figure7).
20.Tightenthe3M8x100boltsrst.
21.Tightenthe2M8x20boltsonthebottomofthe
bracket.
22.TightentheM10x110boltandnutthatgoes
throughtheengineandspacer.
23.Tightenthetopalternatortensioningbracketbolt.
24.Looselysecurethetensioningbrackettothe
alternatorwiththeboltpreviouslyremoved
(
Figure7).
25.Routeoneofthenewbeltsaroundtheenginecrank
shaft,waterpump,andalternatorpulleys(
Figure8).
Figure8
1.Alternatorbelt
3