Installation Instructions

FormNo.3421-409RevA

CEKit

Groundsmaster

4000-D/4100-DSeriesTractionUnit

ModelNo.30453

InstallationInstructions

WARNING

CALIFORNIA

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCalifornia

tocausecancer,birthdefects,orreproductiveharm.

InstallthiskittomeetCErequirements.

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

ProcedureDescription

Qty.

Use

Nopartsrequired

–

Preparethemachineforinstallation.

Hoodlatchbracket1

Flange-headscrew(5/16x3/4inch)

Flangenut(5/16inch)

Coverplate

Washer-headscrew(1/4x3/4inch)

Latchwithnut1

Key1

Installthelatch.

CEwarningdecal

CEmarkdecal

InstalltheCEdecals.

PreparingtheMachine

NoPartsRequired

Procedure

1.Parkthemachineonalevelsurface.

2.Engagetheparkingbrake.

3.Shutofftheengineandremovethekey.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3421-409*A

PAGE 1
Form No. 3421-409 Rev A CE Kit Groundsmaster® 4000-D/4100-D Series Traction Unit Model No. 30453 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. Install this kit to meet CE requirements. Installation Loose Parts Use the chart below to verify that all parts have been shipped. Procedure 1 2 3 Description Use Qty.
PAGE 2
4. Mount the latch cover to the hood-latch bracket with 2 washer-head screws (1/4 x 3/4 inch), positioning them as shown in Figure 1. 5. Install the locking latch through the hole in the side of the hood-latch bracket (Figure 1). Installing the Latch Note: Position the catch through the square hole in the top of the hood-latch bracket (Figure 1).
PAGE 3
– Model 30644: 3 Install the CE warning decal to the cab frame on the left side of the machine; refer to Figure 3. Installing the CE Decals Parts needed for this procedure: 1 CE warning decal 1 CE mark decal Procedure • Install the CE warning decal (Part No. 117-2766) as indicated for your machine model: – Models 30605, 30608, 30609, 30635, and 30636: Install the CE warning decal over the existing warning decal (Part No. 117-2754) on the toolbox; refer to Figure 2. g243516 Figure 3 1.
PAGE 4