Operator's Manual

AdjustingtheRearAnti-Scalp
Rollers
Wheneveryouchangetheheightofcut,adjusttheheight
oftherearanti-scalprollers.
1.DisengagethePTO,movethemotioncontrolleversto
theneutrallockedpositionandsettheparkingbrake.
2.MovethethrottlelevertotheSlowposition,stopthe
engine,removethekey,andwaitforallmovingpartsto
stopbeforeleavingtheoperatingposition.
3.Afteradjustingtheheightofcut,adjusttherollersby
removingtheangenut,bushing,spacer,andbolt
(
Figure22).
Figure22
1.Flangenut
4.Spacer
2.Bushing5.Bolt
3.Anti-scalproller
4.Selectaholesotheanti-scalprollerispositionedtothe
nearestcorrespondingheight-of-cutdesired(Figure
23).
Figure23
1.38mm(1-1/2inches)3.63mm(2-1/2inches)
2.51mm(2inches)4.76mm(3inches)and
higher
5.Installtheangenutbushing,spacer,andbolt.
Note:Torqueto54-61N-m(40-45ft-lb)(
Figure22).
AdjustingtheRollers
Mounttherollersinthelowerpositionwhenoperatingin
heightofcutshigherthan64mm(2-1/2inches)andinthe
higherpositionwhenoperatinginheightsofcutlowerthan
64mm(2-1/2inches).
1.DisengagethePTO,movethemotioncontrolleversto
theneutrallockedposition,andsettheparkingbrake.
2.MovethethrottlelevertotheSlowposition,stopthe
engine,removethekey,andwaitforallmovingpartsto
stopbeforeleavingtheoperatingposition.
3.Raisethefrontofthemachineandsupportitonjack
stands.
4.Removethefastenerssecuringeachrolleronyour
mowerdeck,andmovetherollersupordownas
desired;refertoFigure24throughFigure28as
applicableforyourmower.
Figure24
Allmowerdecks
1.Frontroller
2.Rollershaft
27