Operator's Manual

Figure21
1.Deckliftlever3.Heightofcutstop
2.Stoppin
4.Adjusttheanti-scalprollersandskidasrequired.
AdjustingtheSkid
Mounttheskidinthelowerpositionwhenoperating
inheightofcutshigherthan2-1/2inches(64mm)and
inthehigherpositionwhenoperatinginheightofcuts
lowerthan2-1/2inches(64mm).
1.DisengagethePTO,movethemotioncontrol
leverstotheneutrallockedposition,andsetthe
parkingbrake.
2.MovethethrottlelevertotheSlowposition,stop
theengine,removethekey,andwaitforallmoving
partstostopbeforeleavingtheoperatingposition.
3.Loosenthescrewatthefrontoftheskid.
Figure22
1.Screw3.Skid
2.Flange-headbolt4.Nut
4.Removetheange-headboltsandnutsfromthe
skid.
5.Movetheskidtothedesiredpositionandsecureit
withtheange-headboltsandnuts.
Note:Onlyusethetoporcentersetsofholesto
adjusttheskid.
6.Torquethescrewatthefrontoftheskidto80to
100in-lb(9to11N⋅m).
AdjustingtheRearAnti-Scalp
Rollers
Wheneveryouchangetheheight-of-cut,adjustthe
heightoftherearanti-scalprollers.
1.DisengagethePTO,movethemotioncontrol
leverstotheneutrallockedposition,andsetthe
parkingbrake.
2.MovethethrottlelevertotheSlowposition,stop
theengine,removethekey,andwaitforallmoving
partstostopbeforeleavingtheoperatingposition.
3.Afteradjustingtheheight-of-cut,adjusttherollers
byremovingtheangenut,bushing,spacer,and
bolt(Figure23).
26