Operator's Manual
Figure65
1.Dipstick2.Fillcap
4.Removethedipstickandwipeitwithacleanrag
(Figure65).
5.Placethedipstickintothellerneck;thenremoveit
andchecklevelofuid(Figure65).
Iflevelisnotwithinnotchedareaofthedipstick,
addenoughhighqualityhydraulicuidtoraiselevel
towithinthenotchedarea.Donotoverll.
6.Replacethedipstickandthreadthellcap
nger-tightontollerneck.
7.Checkallhosesandttingsforleaks.
ChangingtheHydraulicOil
AndFilter
ServiceInterval:Aftertherst200hours
Every800hours
Initially,replacethehydraulicoillteraftertherst200
hoursofoperation.
Replacethelterandoilafterevery800hoursof
operation.
1.DisengagethePTO,movethemotioncontrollevers
totheneutrallockedpositionandsettheparking
brake.
2.MovethethrottlelevertotheSlowposition,stopthe
engine,removethekey,andwaitforallmovingparts
tostopbeforeleavingtheoperatingposition.
3.Placealargepanunderthehydraulicreservoirand
transmissioncaseandremovetheplugs,drainingall
ofthehydraulicuid(Figure66).
Figure66
1.Hydraulicreservoirdrain
plug
3.Transmissioncasedrain
plug
2.Filter
4.Cleantheareaaroundthehydraulicoillterand
removeit(Figure66).
5.Immediatelyinstallanewhydraulicoillter.
6.Installthehydraulicreservoirandtransmissioncase
drainplugs.
7.Fillthereservoirtotheproperlevel(approximately6
quarts);refertoCheckingtheHydraulicFluid.
8.Starttheengineandcheckforoilleaks.Allowthe
enginetorunforaboutveminutes,thenshutitoff.
9.Aftertwominutes,checkthelevelofthehydraulic
uid;refertoCheckingtheHydraulicFluid.
55