Operator's Manual

1.Raisetheframeontostablejackstandssothatthedrive
wheelscanrotatefreely.
2.Slideseatforward,unlatchit,andswingitupand
forward.
3.Disconnecttheelectricalconnectorfromtheseat
safetyswitch.
4.Temporarilyinstallajumperwireacrossterminalsin
thewiringharnessconnector.
5.Starttheengine,ensurethatthethrottleleverismidway
betweentheFastandSlowpositions,andreleasethe
parkingbrake.
Note:Themotioncontrolleversmustbeinthe
neutrallockedpositionwhilemakinganyadjustments.
6.Adjustthepumprodlengthononesidebyrotating
thehexshaft,intheappropriatedirection,untilthe
correspondingwheelisstillorslightlycreepingin
reverse(Figure61).
Figure61
1.Rightpumprod5.JamNut
2.Leftpumprod6.Hexshaft
3.Balljoint7.Balljoint
4.Bolt
7.Movethemotioncontrolleverforwardandreverse,
thenbacktoneutral.Thewheelmuststopturningor
slightlycreepinreverse.
8.MovethethrottlelevertotheFastposition.Makesure
thatthewheelremainsstoppedorslightlycreepsin
reverse;adjustitifnecessary.
9.Repeatsteps6through8fortheothersideofthe
machine.
10.Tightenthejamnutsattheballjoints(
Figure59).
11.MovethethrottlelevertotheSlowpositionandstop
theengine.
12.Removethejumperwirefromthewireharness
connectorandplugtheconnectorintotheseatswitch.
WARNING
Electricalsystemwillnotperformproper
safetyshutoffwithjumperwireinstalled.
•Removejumperwirefromwireharness
connectorandplugconnectorintoseat
switchwhenadjustmentiscompleted.
•Neveroperatethisunitwithjumper
installedandseatswitchbypassed.
13.Lowertheseatintoposition.
14.Removethejackstands.
AdjustingtheMaximum
GroundSpeed
1.DisengagethePTO,movethemotioncontrolleversto
theneutrallockedposition,andsettheparkingbrake.
2.MovethethrottlelevertotheSlowposition,stopthe
engine,removethekey,andwaitforallmovingpartsto
stopbeforeleavingtheoperatingposition.
3.Removetheboltssecuringthefrontpanelandremove
thepanel(
Figure62).
1
2
G020875
Figure62
1.Bolts
2.Controlpanel
4.Loosenthejamnutonthestopboltforoneofthe
controllevers(Figure63).
52