Operator's Manual

g032343
Figure8
1.Malecoupler
4.Hoseclamp(1/2to1-1/4
inches)
2.Maledustplug
5.Supplyhose
3.Straighttting(3/8NPTx
0.625barb)
2.Slidethedustplugoverthethreadedendofthe
straighttting(Figure8).
3.Threadthestraighttting(3/8NPTx0.625barb)
tothemalecoupler(Figure8).
4.Tightenthestraighttting(3/8NPTx0.625
barb)intothemalecouple2to3turnsfrom
nger-tight.
5.Slideahoseclamp(1/2to1-1/4inches)over
thehose.
6.Insertthebarbedendoftheassemblyintothe
hoseandsecureitwiththehoseclamp(1/2to
1-1/4inches).
AssemblingtheReturnHose
Note:Usethe86.3cm(34inches)hosefora
machineequippedwiththeYanmarengineanduse
the132cm(54inches)hoseforamachineequipped
withtheKubotaengine.
1.Applysealanttothestraighttting(3/8NPTx
0.625barb);skippingtherstthread.
g030360
Figure9
1.Femalecoupler5.Returnhose
2.Femaledustplug
6.Teetting
3.Straighttting(3/8NPTx
0.625barb)
7.Hoseclamp(1/2to1-1/4
inches)
4.Hoseclamp(1/2to1-1/4
inches)
2.Slidethedustplugoverthethreadedendofthe
straighttting(Figure9).
3.Threadthestraighttting(3/8NPTx0.625barb)
tothefemalecoupler(Figure9).
4.Tightenthestraighttting(3/8NPTx0.625
barb)intothefemalecouple2to3turnsfrom
nger-tight.
5.Slide2ofthehoseclampsoverthehose.
6.Insertthebarbedendoftheassemblyintothe
hoseandsecureitwiththehoseclamp(1/2to
1-1/4inches)asshowninFigure9.
7.Insertthebarbedendoftheteettingintothe
hoseandsecureitwiththehoseclamp(1/2to
1-1/4inches)asshowninFigure9.
11