Installation Instructions

FormNo.3437-269RevA

CenterMowerDeck

SerialNumber313000001andAfterGroundsmaster

4000-D

TractionUnit

ModelNo.30479—SerialNo.403100000andUp

InstallationInstructions

Safety

SafetyandInstructional

Decals

Safetydecalsandinstructionsare

easilyvisibletotheoperatorandare

locatednearanyareaofpotential

danger.

decal133-8061

133-8061

RemovingtheHydraulic

Motor

1.Parkthemachineonalevelsurface,lowerthe

mowerdeck,engagetheparkingbrake,shutoff

theengine,andremovethekey.

2.EnsurethatthetractionpedalisintheNEUTRAL

positionandthePTOleverisintheOFFposition.

3.Removetheboltssecuringthehydraulicmotor

tothemowerdeck(Figure1).

4.Liftthemotoroffthemowerdeckandlayitona

clean,outoftheway,surface.

Note:Ensurethatyoudonotdamage

aluminumcoupler.

g011511

Figure1

1.Hydraulicmotor2.Mountingbolts

5.Removetheelastomericspiderfrominsidethe

pulleycoupler(Figure2).

6.Inspecttheelastomericspiderforwearand

replaceitifitisworn.Retainitforinstallationon

thenewfrontmowerdeck.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA.

AllRightsReserved

*3437-269*A

PAGE 1
Form No. 3437-269 Rev A Center Mower Deck Serial Number 313000001 and After Groundsmaster® 4000-D Traction Unit Model No. 30479—Serial No. 403100000 and Up Installation Instructions Safety Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Removing the Hydraulic Motor 1. Park the machine on a level surface, lower the mower deck, engage the parking brake, shut off the engine, and remove the key. 2.
PAGE 2
g011597 Figure 4 1. Lift-arm mount (2) g011595 3. Move the mower deck away from the traction unit. 4. Move the new mower deck into position and mount it to each caster-arm tube by reversing the procedure. 5. Adjust the height of cut for the mower deck; refer to the procedure in the Operator’s Manual for the machine. Figure 2 1. Elastomeric spider 3. Pulley coupler 2.
PAGE 3
Notes:
PAGE 4
The Toro Warranty Two-Year or 1,500 Hours Limited Warranty Conditions and Products Covered Parts The Toro Company and its affiliate, Toro Warranty Company, pursuant to an agreement between them, jointly warrant your Toro Commercial product (“Product”) to be free from defects in materials or workmanship for 2 years or 1,500 operational hours*, whichever occurs first. This warranty is applicable to all products with the exception of Aerators (refer to separate warranty statements for these products).