Installation Instructions

Figure20
1.Forwardfootrest
4.Proximitysensor
2.Carriagebolt(#10x5/8
inch)
5.Brake-pedallever
3.Brake-sensorplate
6.Locknut(#10)
2.Assembletheproximity-sensorassemblytothe
brakeleverusingthecarriagebolt(#10x5/8inch),
brake-sensorplate,proximitysensor,andlocknut(#10)
asshowninFigure20.
Note:Ensurethatyoudonotovertightenthebolts.
Overtighteningtheboltswilldamagethesensor.
3.Locatethebrake-sensorbracketmountingholeson
thefrontfootrestandlooselyinstallthebrake-sensor
brackettothefrontfootrestusing2bolts(1/4x3/4
inch)and2angenuts(1/4inch).
Note:Youwillneedtomovethebrake-sensor
bracketupordowntoalignthebrakesensortothe
brake-sensorplate(Figure21).
Figure21
1.Forwardfootrest
5.Brake-sensorbracket
2.Slottedscrew(#6x1inch)6.Locknut(#6)
3.Washer(#6)7.Bolts(1/4x3/4inch)
4.Brakesensor
8.Flangenut(1/4inch)
4.Looselyinstallthebrakesensortothebrake-sensor
bracketwiththe2slottedscrews(#6x1inch),2
washers,and2angenuts(Figure21).
5.Alignthebrakesensorinoroutandthebrake-sensor
bracketupordownsothattheswitchonthebrake
sensorispressingagainstthesensorplate.
6.Completethebrake-sensorassemblyinstallationby
tighteningallofthemountinghardware.
•Tightenthe2slottedscrews(#6x1inch)and2
angenutstormlysecurethebrakesensortothe
brake-sensorbracket.
Note:Ensurethatyoudonotovertightenthe
screws.Overtighteningthescrewswilldamagethe
sensor.
•Tightenthebolts(1/4x3/4inch)and2ange
nuts(1/4inch)holdingthebrake-sensorbracket
tothefrontfootrestto1017to1243N-cm(90to
110in-lb).
Important:Afteryoucompletetheinstallationofthe
lightkit,verifythatthebrakesensoractivatesthebrake
12