Installation Instructions

DrillingHolesintheRearBumperfor
theRegistrationPlate
Usingthedimensionsshownin(Figure8)tolocateanddrill
2holes9/32inchdiameterthroughtheoutsidewallofthe
rearbumper.
Figure8
1.8.3cm(3-1/3inches)3.52.07cm(20-1/2inches)
2.13.3cm(5-1/4inches)4.9/32inchdiameter
DrillingholesintheFrontFootrestfor
theBrake-PedalSwitch
Usingthedimensionsshownin(Figure9)tolocateanddrill2
holes9/32inchdiameterthroughthefrontfootrest.
Figure9
1.15.52mm(6.11inches)4.17mm(0.68inch)
2.32mm(1.27inches)5.9/32inchdiameter
3.20mm(0.77inch)
6