FORM NO. 3314-389 ( MODEL NO. 30505 ADDENDUM k 15 CU-FT HOPPER CHUTE MODIFICATION IMPORTANT: When the chute in the Blower Kit is used with a 15 choice foot Topper Kit, you must cut off a section of the chute to assure proper fit between the bower and the hopper. 1. Using dimensions shown in illustrations below, use a tape measure and mark the chute. 2. Draw lines around all sides of the chute and cut off with a saw. Note: For convenience, moss chutes have a light scribe mark where the chute must be cut off.
